I have setup the wireless connection just like in the sparkfun tutorial but in the Wireless Network status menu it just says ‘device not ready.’
If I plug the dongle in I see this in dmesg
1627.460000] RTUSBVenderReset
[ 1629.230000] Error! The chip does not support 5G band 15!
[ 1629.580000] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 1629.590000] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
[ 1629.670000] !!! rt28xx Initialized fail !!!
[ 1629.680000] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
[ 1629.680000] NICLoadFirmware: firmware loaded already
[ 1629.680000] MacReg = f80, isMCUnotReady
[ 1629.680000] —>RTUSBVenderReset
[ 1629.680000] Error! The chip does not support 5G band 15!
[ 1630.030000] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 1630.030000] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
[ 1630.110000] !!! rt28xx Initialized fail !!!
[ 1630.110000] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
[ 1630.110000] NICLoadFirmware: firmware loaded already
[ 1630.110000] MacReg = f80, isMCUnotReady
[ 1630.120000] —>RTUSBVenderReset
[ 1630.120000] Error! The chip does not support 5G band 15!
[ 1630.490000] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 1630.490000] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
[ 1630.580000] !!! rt28xx Initialized fail !!!