Fluo on PRT-09740 - Binding Post - Black
So, is this like the “female” for the banana plugs?
View ArticleCustomer #62364 on PRT-08812 - ProtoBoard - Rectangle Wired 3"
I’m sorry, but these boards are a gimmick at best. I bought this double sided PCB expecting a double sided PCB. Instead, I got a board full of vias. This means that instead of being able to have a...
View ArticleFluo on PRT-09739 - Binding Post - Red
So, is this like the “female” for the banana plugs?
View ArticleFluo on PRT-10693 - Light Pipe - White Core (3.5mm, 1' long)
Would it take the light better if I were to drill a hole in the end and jam the LED in there, rather then just stick it on the end?
View ArticleCustomer #167213 on WRL-10938 - Bluetooth Modem - BlueSMiRF HID
Hi,Good module but it seems to disconnect and never keep the connexion to my computer, I saw a few settings in the manual I’d like to activate but I can’t get to the config mode. ( also oddly I don’t...
View ArticleCustomer #413870 on SEN-08733 - Infrared Sensor Jumper Wire - 3-Pin JST
can i just hook this up to my arduino to turn an led on if the ir beam is broke?
View ArticleCustomer #437688 on DEV-09779 - Chumby Parts - Main Enclosure (refurbished)
I am also thinking of buying these parts for my project as I am doing complete renovation of my Chumby.homes for sale aventura
View Articleskumdog on PRT-10158 - Break Away Headers - Long
That is exactly what I am going to buy. Get the plastic bit in the middle and save almost 2 bucks!
View ArticleCustomer #337789 on WRL-10060 - WWVB NIST Radio Time Receiver Kit
You need to get these back, people need these for propagation openings, setting clocks, and for making clocks for atomic clock time. I don’t understand and don’t know why you cannot bring these back.
View ArticleCustomer #437700 on LCD-11743 - Raspberry Pi Display Module - 3.2"...
What’s the current draw?
View Articlegreyrobotgoo on COM-07835 - Button Pad 4x4 - LED Compatible
I hate to be a curmudgeon, but these are silicone, not silicon! (that would be kind of difficult to press…)
View ArticleCustomer #415568 on Ardumoto Quickstart Guide
So i’m struggling a bit: Will this board not work if you are only powering the board with a 5V USB connection? I need to run my project off a USB power source and would like to know if this board would...
View ArticleHelicopterGuy on Silicon Junkies and Solid State Depot - Red Bull Creation...
Very cool! I’d love to see more of the interface. You’ve got my vote!
View ArticleToni_K on WRL-10060 - WWVB NIST Radio Time Receiver Kit
Unfortunately, we kept running into supply issues with these. We are still working on finding a replacement module from a more reliable source, but unfortunately, it is taking time.
View ArticleToni_K on PRT-08812 - ProtoBoard - Rectangle Wired 3"
For some customers, the wired board does actually increase their prototyping time. I think you were probably looking for this double-sided protoboard instead. Sorry for the confusion!
View ArticleToni_K on DEV-10085 - LilyPad Simple Power
Don’t forget to solder the jumper closed or add in a resistor. We are working on a revision of this to make it easier to start using out of the box, but that should fix the problem you’re seeing.
View ArticleToni_K on COM-09119 - Slide Pot - X-Large (10k Linear Taper)
Email techsupport@sparkfun.com. They’ll be able to assist you with getting replacements. Sorry about that!
View ArticleToni_K on SEN-11776 - Muscle Sensor v3 Kit
I’d recommend reading up on electromyography. This will be the best way to start understanding the signals and exactly what this sensor does.
View ArticleToni_K on Ardumoto Quickstart Guide
The issue you are going to run into is current. Most USB ports cannot output more than 500mA, and depending on the motors, you may need to supply more than that. The other issue is that powering the...
View Article