Duckman on COM-10976 - Slide Pot - Motorized (10k Linear Taper)
I’m sorry to hear that happened. Not trying to be rude here, but why did you run a live current through the terminals without knowing what they are? There are no wires or connectors from the motor...
View ArticleDuckman on COM-10734 - Slide Pot - Motorized (10k Audio Taper)
There are some useful suggestions for use, along with a link to a working project on the page for the linearly tapered version of this product: https://www.sparkfun.com/products/10976
View ArticleCustomer #375102 on WRL-11678 - RN-52 - Bluetooth Audio Module
Will this connect to iOS devices?
View ArticleGnintendo on DEV-11773 - Gertboard
Can you look into selling the assemble-yourself Gertboards?
View ArticleCustomer #401455 on The FCC and Open Source Hardware
I recently sent an inquiry to the FCC about this. They replied and said they are clarifying the definition of “evaluation kit”. Here is the link to the relevant...
View Articlejoesugar on WRL-11678 - RN-52 - Bluetooth Audio Module
Does this module bear any relationship to the Bluegiga WT-32 module that used to be available?
View Articleawelters on TOL-10617 - LiPo Fuel Gauge
Here is a library I put together that has proven helpful to me: https://github.com/awelters/LiPoFuelGauge. Hope it helps others.
View ArticleAtomic on WRL-11678 - RN-52 - Bluetooth Audio Module
One day, Americans will remember there’s other countries, that have Internet, outside the US, and stop using US-specific coins to indicate size of items…
View ArticleCustomer #440895 on GPS Shield Quickstart Guide
hi friend i hv a problem in using the gps shield that it take long time to connect the sat meant sometime it connect it in a min or sometime it need a day for searching in same place so plz tell me...
View ArticleCustomer #399355 on COM-11323 - EL Sequencer
Hey Mike, Thanks for all the help. I’m working through your code. I’m wondering how to incorporate the Xbee’s. I’ve tried multiple different sources, but Once you have the header pins on and such. Do...
View ArticleBigJay on ROB-11593 - Rover 5 Motor Driver Board
I’m curious if this can work with the logic supply at 3.3v instead of 5v. If it does work, How does that affect the current sensing analog output?
View ArticleCustomer #440928 on DEV-10032 - CMUcam v4
Hi there, I wonder who’s friend as you hear of our boards very early. Anyhow check http://silicam.org/welcome/?page_id=69 as we are giving a IGO for free every month for people to play and see the cool...
View ArticleCustomer #309525 on SEN-00242 - Infrared Proximity Sensor - Sharp GP2Y0A21YK
I know it has been asked before but I just want to ask again. Will this work at Vcc=3.3 V? The datasheet says that it is within the acceptable input voltage range. If not, any ideas on how I can...
View Articlegiantsfan3 on SEN-11486 - 9 Degrees of Freedom - MPU-9150 Breakout
Right. However, note that Pansenti’s library (linked in earlier comments) provides sensor fusion using the onboard DMP as far as I’m aware.
View ArticleDavid on BOB-10859 - L6470 Stepper Driver Breakout
Thank you, Joe P. — I was also getting weird values for ABS_POS. After I fixed dSPIN_Param() by sprinkling “unsigned long” casts as you recommended, ABS_POS now works great — thank you!
View Articlezhivko on DEV-11343 - IOIO-OTG
Yes I completely agree – would it be too hard to add this “not so common” connector to the “so common” usb otg cable that comes with package? I got package after 1month, and now I am still looking for...
View ArticleCustomer #397229 on WRL-10822 - RN-XV WiFly Module - Wire Antenna
We are facing a couple of issues while trying to call a web service using this product. The responses are both truncated and contain a lot of unreadable characters. Please see details below. Any...
View ArticleSleepwalker3 on DEV-11714 - pcDuino - AV Kit
If you search for ‘USB Hub’ on SF, this doesn’t come up, you have to go digging :(
View ArticleJakeR on Hacking your WiFi Card
Now all you need is a 2.4GHz yagi antenna and you can grab Starbucks’s free internet without leaving the expressway.Also, I’m assume “increasingly harder” means that it is not only becoming harder or...
View ArticleMr_Awesome on SEN-11234 - MPU-6000
I agree, if we could get the MotionFusion documentation for this it would be great. I’ve played with one of these using the FreeIMU libraries vs the reverse engineered MotionFusion and the on-chip...
View Article