Customer #58350 on WRL-11678 - RN-52 - Bluetooth Audio Module
Does anyone know if they command mode may be controlled from the SPI or is it only possible with the UART?
View Articlegmrple on New Product Friday: The S.H.O.V.E.L.
Yeah, I thought that was another sparkfunion (maybe from the legal department) delivering him a printout of the patent—letting him know they can’t sell that.
View ArticleCustomer #49925 on KIT-11042 - Beefcake Relay Control Kit
Quick question, What board revision is currently shipping? Thanks
View ArticleClik here to view.
TheCentaur on New Product Friday: The S.H.O.V.E.L.
OK, so I could not pass this up. I just ordered a S.H.O.V.E.L. (and a few other items besides including the funky mA meter from last week.)Never know when I might be caught without a spoon and fork, or...
View ArticleCustomer #394180 on SEN-11418 - HackHD - 1080p Camera Module
Anybody have any luck using this with a microSDHC card? That’s all that they had left at the local Phone Booth, no microSD or microSDXC. After about 10 seconds of recording the damn thing stops and its...
View ArticleCustomer #444802 on BOB-10344 - Si4703 FM Tuner Evaluation Board
in the sample code there is a mention of AN243 document, here’s the link to itAN243IDK, maybe you found it already, but I hope it helps.
View ArticleAdamTolley on TOL-11763 - S.H.O.V.E.L.
There’s no reason it can’t be both. I for one will endeavor to think of this as the sparkFoon, because thats just an awesome name.
View ArticleAdamTolley on DEV-11575 - RedBoard - Programmed with Arduino
What is the name you use – is it set by the device, by the code, or by the driver?Thanks
View Articlejepler on DEV-11575 - RedBoard - Programmed with Arduino
The BOM calls Y1 a 16MHz resonator, so I’m guessing it’s the less expensive and less accurate part. A typical* resonator has .5% tolerance, or 7.2 minutes/day, so it’s a poor solution for timekeeping...
View ArticleCustomer #444817 on RTL-11445 - XBee Wireless Kit Retail
I wonder the same, what would be the purchasing procedure and how to calculate the shipping fee or shipping?
View ArticlePaul Smith on TOL-11763 - S.H.O.V.E.L.
I’m sorry I failed you. You could also leave a hoop in the paracord.
View ArticleCustomer #27199 on According to Pete - Spectra Symbol Contest and Workspace...
Not sure if this was already posted already (A lot to read). Maybe looking at an interface of some kind where the user may apply it to a curved surface.If what you are holding in hand is to be used in...
View ArticleCustomer #255632 on DEV-11546 - Raspberry Pi - Model B
Now you guys have over 15 hundred units. Bravo! What did you do to get this many?
View ArticleCustomer #436831 on TOL-10707 - Soldering Iron Variable Temperature 50W
Other users here report using the Hakko tips with no problems.
View ArticleCustomer #444850 on SEN-11028 - Triple Axis Accelerometer & Gyro Breakout -...
Thanks to Jeff Rowberg for your great work and those usefull examples.The “MPU6050_raw” example is working fine for me. But the “MPU6050_DMP6” is not, I’m seriously thinking that my INTpin is not...
View ArticleCustomer #413600 on TOL-09161 - Solder Leaded - 100-gram Spool
So with this you dont need any solder paste or a flux pen?
View Articleari6126 on KIT-11178 - BigTime Watch Kit
To answer my own question, the pins have to be removed to close the case back up.
View ArticleRS2VN on SEN-11084 - MPL3115A2 Altitude/Pressure Sensor Breakout
Hi! When establishing a handshake and reading from 0x0C I’m getting return in value 0, not 196. I would expect -1 or FF in case I2C is not established. I can not get any other data from the device....
View ArticleKamiquasi on TOL-09161 - Solder Leaded - 100-gram Spool
For most small work on new boards, from resoldering a tiny SMD resistor to soldering down the small tabs on a barrel jack plug, you should be fine.. the flux core does the trick. For bigger things, say...
View ArticleCustomer #323120 on TOL-11763 - S.H.O.V.E.L.
In case you want to create your own using custom materials: http://bit.ly/18eyEww
View Article