Customer #445267 on Stepper Motor Quickstart Guide
A wonderful guide to start working with Arduino Uno. As you can see I add a link in my article http://www.intorobotics.com/arduino-uno-setup-and-programming-tutorials/ where is an impressive collection...
View ArticleGaver on AVC 2013 recap
I second the suggestion – you could encourage the competitors to document their entry construction and process by awarding points. Should be easy to verify the documentation onsite with a smartphone –...
View Articleskbeez on ROB-11015 - Solenoid - 5v (small)
What’s the best way to mount these? Does the metal case come off? I’ve got them working but I can’t for the life of me figure out how to mount them
View ArticleCustomer #447834 on PRT-10365 - Jumper Wire - 0.1", 5-pin, 4"
Do these come with 9-pin female to female?
View Articleheckler95 on DEV-09716 - FTDI Basic Breakout - 5V
The 100nF capacitor in series with DTR worked for me too. No need for pull-ups on TX/RX. Thank You!!
View ArticleCustomer #428554 on WRL-08687 - XBee Explorer USB
Is anyone else having issues looking at the schematic? When I click the link in the Documents section above, all that shows up on the PDF is a few dots and circles (and a couple of other symbols.
View Articlel0gik G8 on WRL-08687 - XBee Explorer USB
I’m using an older version of Firefox and it works for me. Apparently the newer version of the Firefox built-in PDF viewer has some problems. Try a different browser or download the PDF first and open...
View ArticleCustomer #242492 on ROB-08897 - Serial Servo Controller
Thank you! Arduino example sketch rocks!
View ArticleNandox7 on TOL-10242 - Solder - 1/4lb Spool (0.020") Special Blend
Got way more expensive than the last time I got it.. :(
View ArticleCustomer #425925 on COM-11621 - Slide Pot - Medium (10k Linear Taper)
If there was a little more information, especially a pin out chart like #93814 said that would be really helpful and I’d be very grateful… Making these things become guesswork is never really my ideal...
View ArticleEvilTwin on Engineer Thursday - Tearing Apart the Leap Motion
I heard something interesting on a related topic, that people were buying the camera/motion sensing unit that goes in the xbox kinect and creating cool devices not related to the xbox.
View ArticleCustomer #413731 on KIT-11087 - "Uh-oh" Battery Level Indicator Kit
ive made about 4 low-battery indicator circuits, through-hole, and 2 using SMD parts, Green LED lights up and stays on when power is good and a red LED lights up when the power drops below the set...
View ArticleCustomer #196129 on COM-09689 - Optical Dust Sensor - GP2Y1010AU0F
Is there any wiring example for this device? Please send me if there is at vedran@nardev.org
View ArticleCustomer #222 on WRL-10822 - RN-XV WiFly Module - Wire Antenna
Yes it is. See http://sailboatinstruments.blogspot.ca/2012/10/talking-to-android-phone-through-wi-fi.html
View Articleshardbearer on TOL-10603 - Tweezers - Straight (ESD Safe)
https://www.sparkfun.com/products/11060
View ArticleCustomer #442918 on SEN-09404 - Methane CNG Gas Sensor - MQ-4
Im using the 5V voltage regulator. The input to the regulator is 7.4V. So do I need to add in a resistor to reduce the current flowing through the heater? If yes, how much?
View ArticleCustomer #394026 on KIT-11591 - ISP Pogo Adapter
Ok, 10 bucks more is the price to bring back to live my LilyTiny without getting crazy. Anyway, nice longterm solution. Complete set of usage options.
View Articlemaxpn on SEN-11345 - Geiger Counter
I connect that board to usb and read from /dev/ttyUSB0. When I read byte by byte I’ve got‘\n’, ‘\space’ 11 times, ‘\n’ and that’s all.Green ‘Counter’ led blinks from time to time but no more bytes read...
View Article