Customer #413211 on LCD-11377 - Serial Miniature LCD Module - 1.44"...
why the Pmmc loader always come out a comment "unexpected response from display -0" when i change the firmware form GFX to SGC. I just followed the tutorial in this...
View Articlemellis on PGM-11460 - Tiny AVR Programmer
Hmm, there are some physical things that could be wrong: is the chip in backwards? are any of the legs of the chip bent underneath instead of actually inserted in the socket?Can you enable verbose...
View Articlecarnellm on SparkFun at POSSCON 2013
I will be there - already signed up and ready to go. Can I assume you will be selling the kits on premises?
View ArticleSora62896 on According to Pete - The Adventures of Little Dude
Even so, I want your pile! lol
View Articlebrennen on COM-07902 - Capacitive Touch Sensor IC (Sale)
If you click the "Autonotify" button to the right of the product description, just below the price info and "Add to Wish List", you can register for an automatic e-mail notification when we restock the...
View ArticleSFUptownMaker on DEV-11712 - pcDuino - Dev Board
I was wrong about the keyboard boot thing. Turns out, it just dumps into a blank screen saver REALLY fast after boot, and without a keyboard, you're just kind of stuck there. The change to stop that...
View ArticleCustomer #410849 on COM-09906 - Laser Module - Green
So, what if I required a laser that had a output up to 100-200 mW. I want to use it to send the light to a light to frequency converter, then that will tie into a microcontroller and cause my project...
View ArticleRobotDude on According to Pete - The Adventures of Little Dude
Hey Pete, thanks for the Project. What kind/Brand of lead pencil are you holding when you point to the Little Dude? Thx.
View ArticleToni_K on DEV-08544 - Conductive Thread - 117/17 2ply
You're correct. The nylon is not visible under the silver coating (but with enough patience, you could 'rub' off the coating to get to the nylon string. This would however, then remove the conductive...
View Articlecaptain_obvious on SEN-08656 - Compass Module with Tilt Compensation - HMC6343
Hi!Hope this might prove itself useful for somebody.I wrote a library to simplify using this with the arduino, have a look at my github: https://github.com/n-ovesen/hmc6343/blob/and please let me know...
View ArticleMikeGrusin on Setting up an EL display with the EL Escudo Dos
Hi Juan, a two-battery setup is probably the simplest way to do this. Run the Lilypad off a 3.7V battery, and run your 11.1V battery into the VIN pin on the EL Escudo. Use your soldering iron to put a...
View ArticlePete-O on According to Pete - The Adventures of Little Dude
Uh... Pentel Graphgear 1000, 0.7. 5's always break on me.
View ArticlePete-O on According to Pete - The Adventures of Little Dude
Yeah, I coulda done it that way (and it might have been cheaper, too)... but I didn't. It's funny, but for a guy that's so far into RC stuff, I don't always go for servos when I need something to move....
View ArticleMikeGrusin on DEV-10999 - Pro Micro - 3.3V/8MHz
The ATmega has a brown-out detection circuit (BOD) that can be set to hold the processor in reset when VCC is below a threshold, or disabled entirely. I believe that this is used by default on the...
View ArticleLightManCA on According to Pete - The Adventures of Little Dude
Well that's true. More like a punch in the face vs a nice gentle nudge.
View ArticleArduino Dude on According to Pete - The Adventures of Little Dude
Yah, but googly eyes are better!
View ArticleArduino Dude on According to Pete - The Adventures of Little Dude
I agree 5's break too easily.
View ArticleFrencil on SparkFun at POSSCON 2013
Sorry, we will not be selling kits. The folks and gear we're bringing along are just enough to do our presentations, run our workshops, and do some customary conference schmoozing.
View ArticleCustomer #35511 on AVC Update and "Engineering Roundtable" - Homemade...
Paul, thanks for the link. I appreciate it.
View Articlevga on WRL-09954 - WiFly Shield
I tested this shield with the Due and it worked fine. What you will need to do is to make a few fixes here and there in the library code as it won't work as is in the Due.
View Article