Nate on KIT-11227 - SparkFun Inventor's Kit for Arduino
This is amazing feedback! Thank you John! We’re parsing it and will roll with as much as we can.
View ArticleCustomer #446292 on Want More Info on SparkFun Classes/Workshops?
I wish an opening would come up in the Summer semester class. I’d love to go; and I wouldn’t mind visiting Boulder either!
View ArticleDraco Carathyr on TOL-09538 - Soldering Tip - Plug Type - Conical 1/64"
What is the OD (outer diameter) of the shank?If possible in both Imperial and Metric (for those every where else but the US or the science people like me)Thanks,Dracō (Dr-ah-k-oh)
View ArticleCustomer #451705 on PRT-11797 - Enclosure for pcDuino/Arduino - Clear
Yes it does fit a Mega 2560, and has a faceplate to suit basic Arduino connectors (USB-B and power). The mounts are for Uno and similar boards. The DFR Mega board doesn’t have the “middle” holes, and...
View Articlealxxx on DEV-09595 - MIDI Shield
Whats the maximum current output from these ? About 60mA?We want to use these to drive relays
View ArticleCustomer #451726 on ROB-00319 - Dual Motor GearBox
I have tried Motor Driver 1A Dual TB6612FNG with success on this motor and gearbox. Quote “The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak).” I love...
View Articlecontriv4nce on DEV-11575 - RedBoard - Programmed with Arduino
UNO R3 Uses the Standard B.You might be thinking of the Leonardo? But that uses Micro.
View ArticleKammi on SEN-09570 - Infrared Thermometer - MLX90614
I really wanted to use this sensor with a Teensy 3.0 (ARM based) board, but all the working code I could find uses the i2cmaster library and is dependent on the microcontroller being AVR based. I never...
View ArticleCustomer #446661 on SEN-11836 - Fingerprint Scanner - 5V TTL (GT-511C1)
I need to use this fingerprint scanners in several locations. but i need only one database for all scanners. is that possible?
View ArticleCustomer #47352 on ROB-11699 - Big Easy Driver
Are you connecting the big easy driver’s VCC pin to the 5V/2A supply? If so, that’s your problem. The VCC pin is an output – there’s an onboard regulator that regulates the motor supply power down to...
View Articlepratikshinde on TOL-10617 - LiPo Fuel Gauge
This example code did not work on atmega128A, After using sample code from this page, It worked fine :)http://www.nongnu.org/avr-libc/user-manual/grouptwidemo.html
View ArticleCustomer #403660 on SEN-10955 - Triple Axis Accelerometer Breakout - MMA8452Q
I’m having this same problem, did you ever get it figured out?
View ArticleCustomer #451752 on SEN-10537 - Serial Accelerometer Dongle
hello , i bought the accelerometer few days ago , but i tried to get the information on hyperterminal but it doesnt work . it gives me (ySN)ëÒÛSÂ) the accelerometer takes power from the serial port as...
View ArticleCustomer #451756 on Office Door Castle Knocker
I agree with your Blog and I will be back to check it more in the future so please keep up your word. Safco office furniture dealer
View ArticleCustomer #451763 on DEV-10587 - Music Instrument Shield
Hi, I want to build an organ but I have some questions. If I use arduino and other IC to send MIDI data to this shield, will it work? Thanks Mike
View ArticleCustomer #449912 on WRL-11678 - RN-52 - Bluetooth Audio Module
I also ordered the development kit from Microchip. I would like to use third-party (PTT) push to talk applications on my phone via this bluetooth module. I’m also trying to assign a GPIO and I can’t...
View ArticlePalmTreesandPICs on COM-11759 - Infrared Remote Control
… i have to admit, this is a great addition to your products.
View ArticleCustomer #451790 on DEV-09476 - WIZnet Serial-to-Ethernet Gateway - WIZ110SR
I would like to purchase WIZNET110SR
View ArticleCheckers on Thumb Joystick Retail
That is exactly right. I would put the black lead of your meter on GND and the red lead on SEL. The logic will reverse. 0V when pressed, Vcc when not pressed.
View ArticleCustomer #451765 on DEV-08562 - 40 Pin PIC Development Board for PIC18F4550...
Will I need to order a programmer aswell to program this? Or can it be programmed by usb by default?
View Article