jawa on WIG-10311 - PicoBoard
The original picocricket kit includes sensors (light, sound, etc.) and motors. Can you provide links to compatible sensors/motors at sparkfun? Thanks. MJ
View Articlevertikar on Chernobyl and the Leiger
The guys who make the APM/arducopter already have the software.. https://code.google.com/p/ardurover/And some more info on the diydrones site: http://diydrones.com/group/ardurover-user-groupAnd finally...
View Articleskbeez on LCD-11741 - Arduino Display Module - 3.2" Touchscreen LCD
If I wanted to put this in a case, how would I do it? Do I have to make a custom case?
View ArticleCustomer #423956 on COM-10469 - EL Inverter - 12v
I’m looking to install this in my car to run some EL-wire in my trunk around my sound equipment. can this inverter handle 11 – 14 V fluctuations?
View ArticleChris on Chernobyl and the Leiger
In college, I had a physics professor that went over to survey the damage and help plan part of the cleanup. A fellow professor that went with him received a fatal dose by walking past an open doorway....
View ArticleLordFawful on BOK-11729 - Python for Kids: A Playful Introduction to Programming
Google is your best friend, right from the top of the search wiki says “manufacturer’s suggested retail price”
View ArticleCustomer #423974 on WRL-11279 - Synapse RF266PC1 - 2.4GHz (chip antenna)
If anyone happens to have one of these and a scale, could I get a weight? I’m interested in using on some RC models and every gram counts!
View ArticleCustomer #210216 on SWG-11079 - Hackerspace Passport
There are three Latin words writte on the logo: EXAMEN NECESSITATUM OMNIUM, I wonder what that means?
View ArticleJoe User on COM-11410 - SparkFun Inventor's Kit for Arduino - Carrying Case
Is this guy ESD safe? I’m looking for storage that will allow me to ditch some static bags.
View ArticleCustomer #48109 on DEV-11113 - Arduino Pro Mini 328 - 5V/16MHz
Thanks! Yes, I did in fact burn new fuse values and then a new bootloader to run at 8MHz and fed in 3.3V on VCC, everything runs like a charm. It still seems to draw a bit more power than I’d like in...
View ArticleBBB on WRL-11129 - Si4707 Weather Band Receiver Breakout
What is recommended for an antenna on this?
View ArticleCustomer #423683 on DD-10351 - Pick and Place Spare Parts Grab Bag
When are these coming back?
View ArticleKednerpo on BOB-11040 - LED RingCoder Breakout - RGB
Does anyone have Raspberry Pi Python sample code and wiring they would be willing to share? I’m just getting started and I’m finding the learning curve a bit daunting.
View ArticleJust Passing Through on PRT-10540 - MakerBeam
Sparkfun should offer a few options to buy Makerbeam of various lengths. I found out that I go through a lot of the 10, 15, 20 and 30 mm in framing the project and have little use for the 4 and 6 cm...
View ArticleNate on COM-11647 - OpenSegment Serial Display - 20mm (Blue)
We’ll get it fully linked on Monday but I just pushed an image with the dimensions here. We’ll also try to get a 3D model created.
View ArticleNate on COM-11644 - OpenSegment Serial Display - 20mm (Red)
I stand completely corrected. You are right, the products are usually called out by digit height not overall height.We’ve changed the product titles from 0.1" to 20mm. We’ve found a lot of displays on...
View ArticleCustomer #423669 on ROB-10846 - Stepper Motor - 68 oz.in (400 steps/rev)
Would these work with https://www.sparkfun.com/products/10267?
View Articlechartle on New Product Friday: Teensy New Products
Isn’t there an office move planned?I say push it up a bit and he comes back to an empty building. Or one where ONLY his office remains. :–)
View Articlejpkelly on LCD-11742 - Raspberry Pi Display Module - 4.3" Touchscreen LCD
I had a hard time getting the calculator demo to work. The demo project was set up for 9600 baud and I could not get communication until I set the projects baud to 115200.
View Article