Blacklab1 on New Product Friday: Mux Mux Revolution
It’s just a jump to the left…And then a step to the right…Put your hands on you hips…You bring your knees in tight But it’s the pelvic thrust that really drives you insane… Let’s do the Sparkfun warp...
View ArticleCustomer #413137 on SEN-10586 - USB Weather Board
@mikerector: hai, can you help me to set the usb weather board with the software. I had installed the software but i have no idea how to play with it.thanks.
View Articleanseljh on BOB-00716 - Breakout Board for RJ45
So how have people attached these to their projects?
View ArticleCustomer #427149 on GPS-09566 - 50 Channel D2523T Helical GPS Receiver
The description was updated “see Note 2/6/2012” so I guess the LEA6-T version is included which allows to access the raw data. If that is not the case please respond or update the description accordingly!
View ArticleCustomer #427156 on WRL-08687 - XBee Explorer USB
I just bought a digi XBee ZB S2 ZigBee Module. i just want to know if it works with Sparkfun’s XBee Explorer USB(WRL-08687). Also can the XBee Explorer USB be fixed/ soldered on a bread board, vero...
View Articlea1ronzo on PRT-11231 - Power Cell - LiPo Charger/Booster
Should I try to use this in a solar charging system?It’s hard to say, because every solar charging system is different and will have a unique power budget. On the Powercell, you could attach a solar...
View ArticleCustomer #304228 on The STEMosphere is almost here!
“ You will have a development platform with 5 outputs (LEDs and buzzer), 5 inputs (buttons), and serial access for debugging.”Ummmm, am I blind? Where is the fifth button?
View ArticleKamiquasi on The STEMosphere is almost here!
Maybe they’re counting the sound on/off switch as a button, although that’s a bit of a stretch since it’s fixed to the buzzer (rather than setting a pin to a certain state and having the code deal with...
View ArticlePete-O on SparkFun at the National Robotics Challenge and Fuse Factory in Ohio!
Yup, me and Jeff Branson will be hangin at the NRC. Should be arriving tomorrow night some time.
View ArticleCustomer #415496 on CEL-09607 - Cellular Shield with SM5100B
Hey 409773. It sounds like you know what you are doing. Would you be interested in helping us on our project for a fee? Where are you located? We are in San Francisco, CA. Thanks. You can respond to me...
View ArticleCustomer #97743 on COM-11272 - RGB LED Strip - 32 LED/m Addressable - 1m
Hi,The Red and Blue colours in my led strip are inverted :/,also my led strips does not match with picture shown above. I was working on ws2801 breakout and it works fine , when i set red -outs RED...
View ArticleCustomer #210209 on DEV-10964 - ProtoSnap - LilyPad E-Sewing Kit (Old Stock)
How big is the resistor on the LED?
View ArticleKamiquasi on DEV-10964 - ProtoSnap - LilyPad E-Sewing Kit (Old Stock)
Per the schematic – 100 Ohm.
View Article6strings on SEN-09418 - Digital Temperature Sensor Breakout - TMP102
This sensor is incredibly stable. I have used and abused it while experimenting (dropping it, etc), it is still going strong. Being digital, it is not necessary to take an average of 5 or so readings...
View Articlesudopeople on WRL-09954 - WiFly Shield
I must not understand what’s involved. I see USB dongles with WiFi for like $5 retail, pocket routers for ~$15 on eBay…I take it those modules are wildly different?
View ArticleCustomer #427260 on SEN-11651 - Fingerprint Scanner - 5V TTL
i have the same problem would any one tell me why it happened and is their any solution to these problem or the finger print is dead and i have to buy another one
View ArticleLC on The STEMosphere is almost here!
Sorry guys, I didn’t see this til today. There are a bunch of analog pins left broken out at the side of the simon. We’ll be attaching photosensors to these pins for the fifth. Thanks for keeping us...
View Article