Toni_K on DEV-11401 - Electric Imp Shield
If you have a hot air gun, you can try reflowing the socket and see if you can get a better connection that way. We are looking into this currently as far as improving the reflow on our end, but...
View ArticleMohammad Ali on BOB-09964 - Breakout Board for Electret Microphone
Thanks Mike for your valuable comment :) I could solve my problem by what you recommended.
View Articlerubot on SEN-08661 - Polar Heart Rate Monitor Interface
Will sparkfun ever carry the RMCM01 Polar OEM receiver by itself again?
View Articlethebrit on WRL-11678 - RN-52 - Bluetooth Audio Module
If you are talking about for audio (A2DP) then yes – no problem. Apple doesnt restrict audio profiles
View ArticleCustomer #338104 on Chernobyl and Back
I’d submit, “Are you my mommy?” and, “The Leiger is pretty much my favorite project.”
View Articlethebrit on WRL-11786 - Bluetooth SMD Module - RN-41
Cool – a long range (100m) version of the RN42
View ArticleMikeGrusin on SEN-08661 - Polar Heart Rate Monitor Interface
We would like to, but Polar has withdrawn this sensor from individual sale.
View ArticleCraig Ruaux on Chernobyl and Back
Compliments on your choice of glassware, the 14-24 f2.8 is a wonderful lens. Oh yes, some nice images in there too. Certainly looks like an interesting trip. Did you see any other parts of the country?
View ArticleCustomer #419548 on Chernobyl and Back
Very cool. Were there any decontamination procedures in place for tourists? Or were you on your own?Lots of guts climbing that cooling tower.
View ArticleCustomer #228962 on DEV-10745 - Electric Sheep
I’m mesmerized by your brilliance and wisdom. Did you intend to enlighten my point? Or, did you intend to disagree? Or was your intention merely to insult in a public forum? What exactly is a home...
View ArticleComrad_Durandal on COM-11826 - Toggle Switch - 3PDT
I’d imagine dimensionally it would work – however, the cover and switch would not function as intended – as you have an on position when the missile cover is entirely closed, and when it is entirely...
View ArticleJumpingshio on MP3 Player Shield Quickstart Guide
Is there any other common misstep to check for? I’m using an Arduino Uno, the board has soldered headers, I’ve tried reformatting the cards and different versions of MP3 files but I consistently get...
View ArticleRoundedRooster on Controllable Power Outlet
I would recommend using a PN2222 or PN2222A, since these have the same pinout, package and can sink 600mA. Looking at absolute maximum for the relay (the 1.0W relay) and the maximum 20mA (if a tech...
View ArticleMikeGrusin on MP3 Player Shield Quickstart Guide
Hi, sorry for the problems you’re having! This error message means the library can’t find the card, which could be due to one (or more) of the following: bad card / bad format / bad socket or not...
View Articleshawnee6d on Chernobyl and Back
Wow! Robert that was an amazing trip and no doubt about it. So can you claim to be an official stalker now?
View ArticleXxWOLFxX_1337 on DEV-10524 - ATmega328 with Arduino Optiboot (Uno)
In a lot tutorials I’ve read it says you need capacitors with the crystals to work and in description and also on then Ben Heck Show (show on youtube) it says you only need the crystal? Sorry if this...
View ArticleCustomer #441849 on MaKey MaKey Quickstart Guide (Part 2)
When connecting an LED to the output expansion the light stays on until a key is pressed rather than turning on when a key is pressed. Is this something that can be changed in the settings.h file or...
View ArticleTheCentaur on Chernobyl and Back
Thanks Robert! Great story. Great project. Great pictures.But if you start getting a hunger for brains, it’s too late, you are turning into a zombie. ;)
View ArticleCustomer #441853 on BOB-10616 - TLC5940 Breakout
Could this be used to control steppers? Very new to electronics, incase my question didn’t give that away already. I am trying to control 12 steppers without having to go the 12 or 6 drivers direction....
View Article