Customer #420949 on ROB-08782 - Miga NanoMuscle
The foto with the connections on the site (https://dlnmh9ip6v2uc.cloudfront.net/images/products/8/7/8/2/NM70SimpleHookup.jpg) is not right, check the manual for the correct connection
View ArticleToni_K on PRT-10614 - ProtoBoard - Koala (USB+PTH)
That data sheet is slightly outdated, but overall the information is still helpful. Thanks for catching that!
View ArticleME heat o nator on Fighting Walrus Radio - iPad/iPhone UAV Base-station
Love the “Indie GoGo” dub over job!?!
View ArticleCustomer #413137 on SEN-10586 - USB Weather Board
hai, i just bought this usb weather board and i have problem which i not be able to connect it with the weather board. anyone willing to help me to set up this thing especially on the programming? thanks
View ArticleNPoole on Fighting Walrus Radio - iPad/iPhone UAV Base-station
Bryan said they’d be at AVC this year, so hopefully we’ll get to see Fighting Walrus in action!
View Articlejkm on COM-11705 - Barrel Jack Power Switch - M-F (3")
What size barrel connector does this have?
View ArticleSora62896 on COM-08653 - Keypad - 12 Button
Just as a help, I don’t know if it is fully functional with this specific keypad, but their is a matrix keypad library and tutorial available in the Arduino playgroud
View ArticleCustomer #147398 on COM-09180 - Push Button 33mm - Yellow
These buttons work fairly well, but they don’t tolerate soldering heat well, and they’re very noisy.
View Articledvdvck on GPS-11466 - 50 Channel GS407 Helical GPS Receiver
Someone can confirm if this product has serial or usb interface? :)
View ArticleMikeGrusin on COM-11323 - EL Sequencer
The default program on the board just sequences through all the channels. But it’s very easy to write your own programs and upload them to the board.If you want to remotely control the Sequencer from a...
View ArticleCustomer #422478 on ROB-10267 - EasyDriver Stepper Motor Driver
I have this problem as well.
View ArticleMikeGrusin on DEV-10914 - Arduino Pro 328 - 3.3V/8MHz
Nope, no battery charger on this board. The Fio has one though.If you look at the Atmel datasheets, you’ll find a graph in the back with the safe area for voltage vs. clock speed. The lower the...
View ArticleCustomer #425833 on DEV-10628 - MP3 Player Shield
Compiling issues? Check this out, it helped me. http://www.billporter.info/forum/topic/compile-error/
View ArticleZeroVirus on TOL-10242 - Solder - 1/4lb Spool (0.020") Special Blend
From my training in the Navy as a 2M (Miniature/Microminiature) Tech I can tell you that 60/40 is not what he is talking about. He is talking about 63/37. With Eutetic Solder when it drops 1 degree it...
View ArticleNPoole on COM-11705 - Barrel Jack Power Switch - M-F (3")
It is indeed. We use that size a lot! Thanks for pointing that out, I added it to the description.
View ArticleLightManCA on DEV-10914 - Arduino Pro 328 - 3.3V/8MHz
Thanks for the info. I’ve been looking for “inexpensive”, and I want to make a number of boards for my project. I suppose if I’m making my own board, the cheapest thing is to make my own Arduino...
View ArticleCustomer #331581 on SEN-10061 - LinkSprite JPEG Color Camera TTL Interface
OK I did not really pay attention:eallaud at gmail dot comThx
View ArticleMitch.Tolson on PRT-11214 - MOSFET Power Controller
It’s a crosssectional thing, and current plays the role in the power equation. P=iv, where your power is proportional to the heat capacity of the wires/connections. That’s why connections usually fail...
View ArticleCustomer #204371 on DEV-09530 - OpenLog
Is the schematic broken? I’m getting a .pdf with a few misplaced symbols on it.
View Article